Small Fragment LCP®

The Synthes Small Fragment Locking Compression Plate (LCP) is part of plate and screw system that merges locking screw technology with conventional plating techniques. Locking screws provide the ability to create a fixed-angle construct while utilizing familiar AO plating techniques. A fixed-angle construct provides advantages in osteopenic bone or multifragmentary fractures where traditional screw purchase is compromised.

Product Catalog

Surgical Technique Guide

Category:

Locking Compression Plates (LCP) have the following LC-DCP® features:

  1. Uniform hole spacing
  2. Load (compression) and neutral screw positions

Locking compression plates have combination locking and compression holes (Combi holes) Combi holes allow placement of standard cortex and cancellous bone screws on one side or threaded conical locking screws on the opposite side of each hole

Holes in straight and reconstruction plates are oriented so that the compression component of the hole is always directed toward the middle of the plate.

Some screws that are compatible with locking compression plates found the Small Fragment LCP System include:

  1. 2.7 mm cortex screws: may be used in the distal locking holes; compress plate to the bone; fully threaded shaft
  2. 3.5 mm shaft screws: may be used in the DCU portion of the Combi hole in the plate shaft or in round locking holes; compress plate to bone or create axial compression; partially threaded shaft
  3. 3.5 mm cortex screws (hex & T15 StarDrive™ Recess): may be used in the DCU portion of the Combi hole in the plate shaft or in round locking holes; compress plate to bone or create axial compression; fully threaded shaft
  4. 3.5 mm locking screws (T15 StarDrive Recess): used in the locking portion of the Combi holes or in round locking holes; create a locked, fixed-angle construct; fully threaded shaft
  5. 4.0 mm cancellous bone screws: may be used in the DCU portion of the Combi hole in the plate shaft or in round locking holes; compress plate to bone or create axial compression; fully or partially threaded shaft

Plates and screws available in stainless steel or titanium